Remove and Install VCU - Stark VARG

Steps: REMOVAL - Remove front spoiler - Remove front bolts - Remove rear center bolt - Remove side bolts - Remove the spoiler assembly - Remove carbon fiber spoiler - Remove carbon fiber spoiler bolts - Pull the spoiler backward and upward - Remove front fender - Remove fender bolts - Hold the fender while removing the last bolt - Take the fender out between the forks - Disconnect VCU plug - Remove side bolts - Hold VCU and remove center bolt - Remove VCU INSTALLATION - Hold VCU in place - Tighten bolts to 5 Nm - Connect VCU plug - Install front fender - Install the fender between the forks - Hold the fender in place and install bolts - Tighten front fender bolts to 8 Nm - Install carbon fiber spoiler - Slide the carbon fiber spoiler into place - Tighten carbon fiber spoiler bolts to 3 Nm - Install front spoiler - Slide the spoiler assembly forward and downward - Press down and forward on the seat if necessary to align the holes - Tighten bolts - Tighten rear center bolt to 8 Nm - Tighten side bolts to 40 Nm - Tighten front bolts to 5 Nm,

#